<tbody id="6gj9x"><p id="6gj9x"></p></tbody>
  • <button id="6gj9x"><mark id="6gj9x"></mark></button>

    <rp id="6gj9x"></rp>
    <tbody id="6gj9x"></tbody>

  • company profile Our Infrastructure product range contact us Send enquiry

    Sensor Paver Finisher

    Product Range


    Home Product RangESensor Paver Finisher

    Asphalt Sensor Paver Finisher

    High performance built Asphalt Sensor Paver Finisher is one of the most reliable product by us that holds a great demand overall. The machine product holds a great sense of power and sharpness to bring out unparallel and unmatched quality output over years.
    Sensor Paver Finisher
    Sensor Paver Finisher

    Sensor Paver Finisher Sensor Paver Finisher
    Sensor Paver Finisher Sensor Paver Finisher

    TECHNICALSPECIFICATION
    Transmission Hydraulic
    Hopper capacity (approx) 4cu. mtrs
    Wheel size 1020 mm
    Front wheel
    Turning Radius Outside 4.6 mtrs
    Operating Weight 12000 kg

    SPEED
    Working Speed 0-35 m/min
    Travels Speed 0-14km/h

    PERFORMANCES
    Max Production 200 t/h
    Mat Thickness 10-200 mm
    DRIVE
    Diesel Engine Kirloskar
    Type 6R1080T
    Nos. of Cylinder Six
    Cooling System Water Cooled
    Output@2200Rpm 150BHP@2300
    Electric Starting 12V

    CAPACITY OF TANKS
    Diesel Fuel 120L
    Hydraulic Oil 250 L

    SCREED
    Hydraulically Extendable 2.5-4.5 m
    Vibration Hydraulic
    Burners Optional

    STEERING
    Mechanism Hydraulic
    User friendly two wheels in front section to avoid misalignment during practical rough operations 4cu. mtrs
    System Sauer Danfoss
    BRAKES
    Service Brakes - Hydrostatic. When the directional lever is in Vertical position, the machine is automatically stopped.
    Safety/Emergency Brakes-Multiple disk brakes

    DIMENSIONS
    Overall Length 6550 mm
    Overall Height 3660 mm
    Operating Width (min) 2800 mm
    Operating Width (max) 4500 mm
    AUGER SCREW
    Material C.S. Hard Moulding
    Size 360mm x 180 mm
    Mech. Extensions Two
    Drive Hydraulic
    Controls Independent

    CONTROLS
    The machine is hydraulically controlled. Hydrostatic transmissions composed by a variable displacement pump. This pump feeds in closed circuit a dual displacement axal piston motor gives drive to the Paver. The screed extensions are hydraulically controlled through control lever.
    HOOPER & FEEDING SYSTEM
    The independent movement of two side wings is obtained by means of two hydraulic cylinders. Two conveyors, each side independently controlled and are made of wear-resisting steel.
    Send Enquiry


    ƴ